Blog
Guides and articles from Pratishna Engineers on choosing, sizing and buying injection moulding machines in India.
What Can You Make on a 320 Ton Container Moulding Machine?
What a 320 ton container moulding machine can make: large tubs, pails, crate lids and thin-wall lids, the clamp method, and the limits beyond clamp.
Read moreSweet Boxes and Food Trays: Planning Output on a 260 Ton Machine
Plan sweet box moulding on a 260 t machine: boxes per hour, cavities by clamp, cooling, idle time and FSSAI rules, with a monthly plan and energy cost.
Read more
High-Cavity Thin-Wall Moulds on a 260 Ton Machine
How many cavities a high-cavity thin-wall mould can run on 260 t: single face vs stack, the speed and barrel thin walls need, with an 8-cavity cup check.
Read more
Moulding Pails and Large Tubs on a 260 Ton Machine
Plastic pail moulding on 260 t: pail sizes that fit by clamp, the stroke and barrel a pail needs, and PP grades for drop strength, with a 10 litre check.
Read more
What Can You Make on a 260 Ton Container Moulding Machine?
What a 260 ton container moulding machine can make: pails, 1 kg tubs, reusable and thin-wall containers, cups, with cavity counts and a worked tub check.
Read moreIce Cream Containers: Mould Height and Cycle Time on a 220 Ton Machine
Ice cream container making machine checks: mould height, stroke and daylight for deep tubs, what sets cycle time, and PP grades for freezer use.
Read more
Three Screw Options on a 220 Ton Container Machine Explained
Container machine screw options explained: how a small, medium or large screw changes shot volume, pressure, fill rate and L/D, with a worked example.
Read moreIML Tubs and Lids on a 220 Ton Machine
IML tub moulding on a 220 ton machine: vacuum vs static label holding, what IML adds to the cycle and mould, and label and resin choices for tubs and lids.
Read moreWhat Can You Make on a 220 Ton Container Moulding Machine?
What a 220 ton container moulding machine can make: cavity counts for PP boxes, lids, pails and thin-wall tubs, the clamp method and FSSAI rules.
Read moreDairy Cups and Small Tubs: Output Planning on a 180 Ton Machine
Plan dairy cup moulding output on a 180 t machine: cups per hour by cycle and cavities, what sets cooling, lids and idle time, with a monthly worked plan.
Read more40 mm or 45 mm Screw? Choosing for Thin-Wall Packaging
Screw diameter for thin-wall packaging: how 40 mm and 45 mm screws trade pressure for shot volume, the shot share to aim for, and a worked check.
Read more
Moulding Thin-Wall Food Containers on a 180 Ton Machine
Thin-wall food container moulding on 180 t: cavities by flow ratio, machine and mould needs, a PP thin-wall grade and FSSAI rules, with a worked tub check.
Read more
Talk to Our Engineers
Planning a New Injection Moulding Project?
Share your component, material, mould and production target. Our engineering team will help you identify the right machine configuration.
- Machine Sales
- +91 99690 38542
- Service Support
- +91 97689 28259
- Sales Email
- enquiry@pratishnaengineers.com