Blog
Guides and articles from Pratishna Engineers on choosing, sizing and buying injection moulding machines in India.
What PET Products Can You Make on a 125 Ton Machine?
PET products on a 125 ton machine: narrow-neck preforms for water, oil, FMCG and pharma, and the wide-mouth jar sizes that fit by cavity count.
Read more
PET Moisture and Drying: Why It Decides Preform Quality
PET moisture and drying for preforms: the 50 ppm target, dew point, temperature and hopper time, how IV loss shows up, and how to size a dryer.
Read more
Choosing Between the 32 mm and 35 mm Screw for PET on a 100 Ton Machine
Choosing a 32 mm and 35 mm screw for PET: shot share of the barrel, PET melt density, pressure trade-off and a worked preform example for both screws.
Read more
Water Bottle Preforms on a 100 Ton Machine: What to Check First
Making water bottle preforms on a 100 ton machine? Check the resin grade, FSSAI rules, neck finish, wall and cycle first, with a worked output example.
Read moreWhat PET Products Can You Make on a 100 Ton Machine?
PET products on a 100 ton machine: water, soft drink, oil, FMCG and pharma preforms, plus wide-mouth jars, with the clamp check for each mould.
Read moreStarting PET Preform Production With a 75 Ton Machine
Starting PET preform production on a 75 t machine: the equipment you need, dryer sizing from throughput, first-day checks, and recycled-content rules.
Read moreRunning Trial Preform Moulds Before Scaling Up Production
Trial preform moulds explained: what a trial must prove, barrel size for a small shot, the 0.04 dl/g IV loss check, and what changes at scale-up.
Read moreSmall Pharma and Cosmetic Bottle Preforms on a 75 Ton Machine
Pharma and cosmetic bottle preforms on a 75 t machine: colour and mould change planning, neck finishes, PET grades named for these uses, and machine hours.
Read moreWhat PET Products Can You Make on a 75 Ton Machine?
75 ton PET machine applications: which bottle and jar preforms fit, why clamp is rarely the limit, the stroke and shot checks, and FSSAI rules for PET.
Read more
180 Ton Household vs Container Moulding Machine for Tubs and Containers
Household vs container moulding machine at 180 t: how injection unit, clamp speed, flow ratio and mould depth decide which suits your tubs and containers.
Read more
Storage Boxes With Lids: Matching Shrinkage on a 180 Ton Machine
Storage box moulding at 180 t: why boxes and lids shrink differently, when to measure, which settings and grades bring them into line, and family moulds.
Read moreBucket Moulding on a 180 Ton Machine: Sizes, Shot Weight and Output
Bucket making machine at 180 t: which bucket sizes fit the clamp, how to size the barrel from bucket weight, what sets output, and PP grades for pails.
Read more
Talk to Our Engineers
Planning a New Injection Moulding Project?
Share your component, material, mould and production target. Our engineering team will help you identify the right machine configuration.
- Machine Sales
- +91 99690 38542
- Service Support
- +91 97689 28259
- Sales Email
- enquiry@pratishnaengineers.com